Categories
Contact Us

SHENZHEN SINOLI ELECTRONIC CO., LTD.

HQ Addr.:FLAT/RM 704 7/F, BRIGHT WAY TOWER, 33 MONG KOK ROAD, MONG KO,KL, HK

Office Addr.: No. 502, FL 5th, Blog A#, LingNan Creative Valley, ShiYan Street, BaoAn Distric, Shenzhen City

Factory Addr.: B# 5Fl, Ming Jinhai Group the First Industrial Park, Tangtou Road, Shiyan Town, Baoan District, Shenzhen city, Guangdong Province, China.

Landline: +86-755-6660-5507

Fax: +86-755-6660-5507

Whatsapp/Wechat: +8618665676364

E-mail: info@sinoli-batteries.com

Website: www.sinoli-batteries.com

Service Hotline
+86-755-6660-5507

News

Home > NewsContent

How To Design 3.7 V Lipo Battery Protection?

Shenzhen Sinoli Electronic Co.,Ltd | Updated: Feb 11, 2019

How to Design 3.7 v Lipo Battery Protection?


Introduction: 

More and more portable electronic devices are using 3.7v Lipo battery to give power supply for it's system. why? well, as we all know that lead aicd battery has only 2v rated voltage, which size is too much big, about 4.5 times than the same voltage lithium ion battery. Lipo battery, one of lithim ion batteries, has high voltage, small size and size is changeable and variety.


3.7 v Lipo Battery is using a lot in beauty and skin care device, torch, smart wearable device, like smart ring, smart watch etc.


as we shared a lot of articles for 3.7 v Lipo Battery before, today let's have a look at 3.7V Lithium Battery protection system. 


Major point of 3.7 v Lipo Battery Protection System: 

3.7 v Lipo Battery protection system, SINOLI adopt Charging Module-TP4056


Use min-USB port for charging input power supply voltage (VCC): -0.3V~8V


3.7 v Lipo Battery Protection working principle: 

TP4056 chip is used as the core of the module, and a complete single lithium-ion battery can be charged by constant current/constant voltage. The charging current I = 1200/R1 = 1A (in the case of sufficient input power). Module with charging indicator and standby indicator, charging indicator LED 1 (red) lights up when charging state; full charge LED 1 out, standby indicator LED 2 (green) lights up; no battery access when LED 2 lights up, LED 1 flickers at the frequency of 1 ~ 4S. The module has under-voltage locking function and automatic recoil function. When the input power VCC is less than 3.7V, TP4056 is in shutdown mode. After charging, when the battery voltage drops below 4.05V (roughly corresponding to 80% to 90% of the battery capacity), the charging cycle starts again.

1s 2.8x35mm